Ok I have two merchants that are supposed to just follow a waypoint from one trading post to another and back, here's what I have so far
local turn_speed = {}
local destx = {}
local destz = {}
local health = {}
function merchant_init(e)
turn_speed[e] = 4
destx[e] = 0
destz[e] = 0
CharacterControlUnarmed(e)
health[e] = -1
ai_soldier_pathindex[e] = -1
end
-- THIS SECTION CONTAINS THE WAYPOINT FOLLOWING CODE
function merchant_main(e)
EntObjNo = g_Entity[e]['obj']
CharacterControlUnarmed(e)
if ai_soldier_pathindex[e] == -1 then
ai_soldier_pathindex[e] = -2
-- find initial waypoint path to follow
PathIndex = -1;
pClosest = 99999;
for pa = 1, AIGetTotalPaths(), 1 do
for po = 1 , AIGetPathCountPoints(pa), 1 do
pDX = g_Entity[e]['x'] - AIPathGetPointX(pa,po);
pDZ = g_Entity[e]['z'] - AIPathGetPointZ(pa,po);
pDist = math.sqrt(math.abs(pDX*pDX)+math.abs(pDZ*pDZ));
if pDist < pClosest and pDist < 200 then
pClosest = pDist;
PathIndex = pa;
end
end -- po
end -- pa
-- follow found path
if PathIndex > -1 then
ai_soldier_pathindex[e] = PathIndex;
ai_path_point_index[e] = 2
ModulateSpeed(e,1.0)
SetCharacterToWalk(e)
ai_path_point_direction[e] = 1
ai_path_point_max[e] = AIGetPathCountPoints(ai_soldier_pathindex[e])
end
end
-- If we have a path then lets patrol it
if ai_soldier_pathindex[e] > -1 then
ai_patrol_x[e] = AIPathGetPointX(ai_soldier_pathindex[e],ai_path_point_index[e])
ai_patrol_z[e] = AIPathGetPointZ(ai_soldier_pathindex[e],ai_path_point_index[e])
AIEntityGoToPosition(EntObjNo,ai_patrol_x[e],ai_patrol_z[e])
tDistX = g_Entity[e]['x'] - ai_patrol_x[e]
tDistZ = g_Entity[e]['z'] - ai_patrol_z[e]
DistFromPath = math.sqrt(math.abs(tDistX*tDistX)+math.abs(tDistZ*tDistZ))
if DistFromPath < 300 then
if ai_path_point_direction[e] == 1 then
ai_path_point_index[e] = ai_path_point_index[e] + 1
if ( ai_path_point_index[e] > ai_path_point_max[e] ) then
ai_path_point_index[e] = ai_path_point_max[e] -1
ai_path_point_direction[e] = 0
end
else
ai_path_point_index[e] = ai_path_point_index[e] - 1
if ( ai_path_point_index[e] < 1 ) then
ai_path_point_index[e] = 2
ai_path_point_direction[e] = 1
end
end
end
else
CharacterControlFidget(e)
end
end
-- END OF WAYPOINT FOLLOWING CODE
They do follow the waypoint but stop a distance from the player until you move closer then they start again, what I'm trying to get them to do is just follow the waypoint to its end and back over and over? anyone know how to do this please?
Intel i5 4950 Quad core 3.3ghz AMD FX 6300 x6 cores 3.5ghz(unclocked)
8gb Ram 8gb Ram
AMD Radeon 7570 1gb AMD Radeon HD 6670 2gb
and a well fed mouse on a wheel
I only smile because i have absolutely no idea whats going on