I will be adding stuff to this thread all the time so if mods can ensure is stay open will be good.

T o start thread here is a Custom Prefab Building from WW2 Chateau_A


it has the door frame so all you need is to add the classic door from classic files in GG.
when you select the item to use in GG just click on the ground the look around it will be
placed on the ground some were close by . It is not shown when try to place on the map
as the software from BOTRings is off center when it converts files.

File attached...

4 Sci- Fi Custom Design Prefabs..



there is a door in the folder do not delete it you can either us it and overlay
over the present door frame or simply add the classic door from GG fixtures doors section. note the door
in GG fixtures doors section opens and closes slower than the one I have provided and the audio open and
close time length sound does not match up with the time of the door opening and closing, so decide yourself
witch door you prefair.

More converted stuff to follow...

Download below

Some More.......... They come with only original textures I did not get around to looking into PBR
maybe someone else will.

Sci-Fi Section > Access Corridor D.i.Y Kit



Sci-Fi Section > Maintenance Corridor D.i.Y Kit


More to follow

Some more....

Sci-Fi Section > Lift Tube D.i.I Kit



I will add a door single section in future I forgot that segment...

Download Below.....

Nice !! Thank you

Super Clark , all these models, who made them i want to put it in a folder under the name of the creator

TCG Models m8 all from the basic FPS Creator 9

I would create a folder m8 in GG [ FPS Classics Converted] that way when you back up they are all in same place

Some more..... Platforms_Sci-fi section



more to follow

Download below

This is an awesome conversion, thanks for all your hard work.

Some more..... _sci-fi Staircases & Steps collection

I have made some custom variants for variety 3, 5, 6 steps + left side 1 rail, right side 1 rail, middles no rails,
along with the original staircases...



n.joy

more to come....

Download Below

Some more... Sci-fi Section Platforms (Antigrav)



I have made some custom variants for variety, download put the contents of the entitybank in your created
FPS Classics Converted & add the lift3 script into the scriptbank.

more to come.....................

Download below

Some more...ww2_Lift Tube D.i.Y Kit



I will add a door single section in future I forgot that segment...

more to come.....................

Download below

& some more.... ww2_Platforms




n.joy

more to follow soon...

Download below

I was under the impression these have all been officially converted already, in the free classic dlc pack.

If not, then great work!

Just double check that all the ones you are converting are tgc owned ones, because any of the packs created by fpsc community members need permission for you to convert and dustrubute.

Hopefully there wont be any issues.

@ Belidos , If you check the classics section and fixtures section none of this I have posted is present m8, If it was
I would not have bothered posting today... I only post what I do not see converted or its pointless.

I have checked every folder in GG and none of this there...

But if people want it its here if not I will stop posting no problem m8

I have only posted what I see in the Basic v120 of FPS classic 9 no pack stuff has been posted as yet.

when it comes to the packs I will need to know who the artists were so I can contact them if possible
if a mod could let me know how to fine out the artists are as the packs do not state this information.

Ah that's cool, i thought they'd done them all, but obvioysly not, good work on that then

Have these had permission ?
If they are the Gitbub Zips then no probs … Anything not allowed was already removed

@ synchromeshThey are all classic TGC models Basic v120 of FPS classic 9 no pack stuff
they are the basic models... when fpsc was classed as free like the characters is did was ok to post.

If no feel free to delete thread either way....I wont post anymore

No that's fine then … Just checking for both our benefits
I have to ask ..

@ synchromesh yes m8 I understand I have been a admin for many years on different forums so I'm
quite up to date on protocols...

I would send Lee an email. The prefab should be fine, but the entities need clarification for distribution.

He may say it is fine.

But nice conversions

Hope so
I have been after those platforms for a while

I have pm'd Lee with this message.


Hi Lee, It was requested I contact you regarding converting the old FPSC Classic content, I had started to post
in this thread
https://forum.game-guru.com/thread/220478
I have only bee converting the what comes standard in v120 no pack stuff. I assumed when it was put on gift hub
it was ok to share the content when converted. Can you clarify for me and forum mods what is allowed to be shared
if they are converted to gameguru . If what I have post is not ok I will remove , but it would be nice to
know what we can convert and share with the community. Please contact me as soon as you get chance
regards SuperClark

Hi there,

Its perfectly OK to do this with the stock segments media from FPSC. In fact, its pretty awesome.

As was previously mentioned, third party model packs would be another matter altogether, as copyright would be held by the original artist.

@GGE
Thanks for the confirmation ..
Better safe than sorry and I can grab then myself now
Great work Super Clark ..

I was under the impression these have all been officially converted already, in the free classic dlc pack.

When i passed the conversions over to lee I left out segments only because the entity snapping system was not good enough for working with them. This was before the EBE and I was really hoping Lee would adapter better editing tools to the entity editor so we could use the 1000s of segments FPSC already has for us. It also took a lot of work to bring those all to GG.

The EBE came about and i was a bit disappointed because it had no ability to use original meshes making all walls floors and ceilings flat and square. Which is unfortunate for detailed segments like what we had in the FPSC packs and stock.

I put a couple videos together quite a long time ago of the progress using segments in GG but they really did require some more tools for the entity editor... that unfortunately were given only to EBE. Which i personally dont like using as again its limiting. The system i was hoping to put together would allow for well over 20 textures and unique meshes including organic ones and curved ones.

Some of the videos during the early stage tests, that i dropped since the community didnt seem keen on having segments and wanted whatever the EBE was going to be instead. OF which turned out being even more limiting than the segment editor in FPSC.

These videos were made before the EBE came out:











What you have done by making prefabs of these segments is a great idea. Because working with the current Game Guru entity editor is a complete and utter nightmare, to put pieces together. No draw mode exits and the widget just is not useful.

@GameGuruEvan
Thanks for the confirmation on this matter, I have stuck so far only to the stock v120 FPSC
When it comes to the packs stuff I will get permission from the original artists were I can, and post their
proof of agreement along with any of their work they have agreed to be converted to use in GameGuru.


@synchromesh
I am glad you are satisfied with the work I have done so far. I have 50% of the Classic v1.20 converted
but I have to check with what is already in the classics section DLC, that Teabone gave to Lee, before
I post some more.

@Teabone
I remember these videos you did m8 why I was surprised none of what I have posted so far was
in the classics section content you supplied for the DLC. I hope I have not tread on your work
why posting this content m8, that was not my intension. I just thaught there is still quite a lot
of stuff I have done not in the DLC so why I decided to post.

Anyways, I am happy to keep posting the converted stuff I have done once I have triple checked
there are no issues with them in GG.


Can I get a mods help on 'loading bay' segments' i can not remember if this was FPSC 9 or 10
I don't currently have 10 installed as I only just restarted the conversions again, so can not
check for myself atm.

these are great!!

Super Clark Thank's for your job! very helpful!

UPDATED 13.02.19

Placement in GameGuru fixed,
Drop to ground height fixed,
360 Rotation set now.

Ok this is just a DEMO model,



would like input, would you prefer, the basic model prefab or custom models like this one?
and single level or a combination of 1, levels - 2 levels so on?

Please feel free to give input....

Regards SuperClark

Not at all! I think what you are doing is amazing. Having them as building parts is much easier to work with than just small segment squares. Game Guru certainly needs more content like this. As the EBE just doesn't cut it for most of us.

@Superclark
The only loading bay stuff I was aware of was in Model Pack 3
This is available on the FPSC Githum Repository but is missing a lot of assets as permission was not given for all of the included models. Its a case of what you find in there is all you can use.

@ synchromesh

This is the item I have done in the loading bay...


So if this is a pack is does not state the artist who created them ? so guess I can not post them?

They look great !!
Pity about model pack 3 … Really liked those Dexion shelving.

Ok some more_ FPSC ww2 Section (Rooms) Segments >

The room sections are double thickness an inner and outer skin with different
textures, so I have created both lots so you can have double the entities with different
textures.

bunker_Fighting_Area_Full_ D.i.Y Kit



bunker_Fighting_Area_Mid_D.i.Y Kit



+ Additional Sections with brighter Textured Versions 01_D.i.Y Kit



+ Additional Sections with brighter & Enhanced Textured Versions 02_D.i.Y Kit



I will add more once I have done them...

Attached Rar Files.. Below

Regards SC

Ok some more_ FPSC ww2 Section > Staircases & Steps Segments...
I have made some custom variants for variety 3, 6, 7 steps



More will follow when I have done them...

Regards SC

Rar File Attached Below

Ok some more_ FPSC ww2 Section Windows Segments...
I have made the with & without glass....



More to follow...soon


Regards SC

Rar file Attached Below

Ok some more_ FPSC ww2 Section Walls & Floors Segments...



More to follow...soon


Regards SC

Rar file Attached Below
Attachments

Top class work, thanks Super Clark

You are welcome Tarkus1971 m8, I will be creating some wall segments with doors and window already
inverted with different textured segments so you can truly build walk through buildings.

I will be also adding Full Prefabs 1, 2, 3 , 4. 5 high buildings. something for everyone to look forward too.

No wonder , your name is Super Clark. lol thank you.

A lot of work for you Super Clark!, Great.
I make myself rare for the instend, I had to prepare several concert for my Pipe band, percussion lessons, composition of new score.
Another 1 to 2 weeks and I come back with free



Intel Pentium CPU G3220 3.000 GHz , 8 GB Ram , NVIDIA GeForce GTX 745 2GB 1920 x 1080 , Windows 10 64-bit.
GameGuru , S2Engine HD , Shoot EM Up , CopperCube 6 , Clicteam Fusion 2.5 , Platfinity .

As promised some walls with windows segments ww2 section......

Select the item to use in GG just click on the ground then look around it will be
placed on the ground some were close by . It is not shown when try to place on the map
as the software from BOTRings is off center when it converts files.

Turn snapping on by press B on keyboard until you see snap in bottom of gameguru boarder,
for best results. To snap together place the window segment first, then snap the newer segment
to that as it can be a bit fiddly to get right but it works with effort.

Bunker_Fighting_ Area_Mid_&_Windows



Contents
1 x B_F_ Area_Mid_&_Window_Grand

1 x B_F_ Area_Mid_&_Window_Grand_Fake

1 x B_F_ Area_Mid_&_Window_Small_Fake

1 x B_F_ Area_Mid_&_Window_SQ_Hole

1 x B_F_Area_Mid_&_Window_Small

1 x B_F_Area_Mid_&_Window_SQ_Fake

1 x B_F_Area_Mid_&_Window_Tny_Fake

1 x B_F_Area_Mid_&_Window_Tny_Hole

1 x Grand_Window_Glass

1 x Small_Window_Glass

--------------------------------------------------------------------------------------------------------------------------------
B_Radio_Room_Mid_&_Window



Contents

1 x B_Radio_Room_Mid_&_Window_Grand_Fake

1 x B_Radio_Room_Mid_&_Window_Grand_Hole

1 x B_Radio_Room_Mid_&_Window_Small_Fake

1 x B_Radio_Room_Mid_&_Window_Small_Hole

1 x B_Radio_Room_Mid_&_Window_Small_Hole_Fake

1 x B_Radio_Room_Mid_&_Window_SQ_Fake

1 x B_Radio_Room_Mid_&_Window_Sq_Hole

1 x B_Radio_Room_Mid_&_Window_Tiny_Hole

1 x Grand_Window_Glass

1 x Small_Window_Glass

1 x Small_Window_Glass_02
-----------------------------------------------------------------------------------------------------------------------------------------
Important not DO NOT try to put all the segments into one folder as the textures will screw up
keep the contents in the folders I have already created.

I will add more when I have done them.....

If you download at least say thank you for my efforts

Regards SC

Files Removed until i fix the windows

Nice work big thanks.

Thank You - Super Clark
This is a lot of great work...

The last of the ww2 fpsc classic windows & Single Middle wall segments.......

Bunker_Storage_Area_&_Windows,


Contents

1 x B_S_Area_&_Grand_Win_Fake

1 x B_S_Area_&_Grand_Win_Hole

1 x B_S_Area_&_Small_Win_Fake

1 x B_S_Area_&_Small_Win_Hole

1 x B_S_Area_&_Square_Win_Fake

1 x B_S_Area_&_Square_Win_Hole

1 x B_S_Area_&_Tiny_Win_Fake

1 x B_S_Area_&_Tiny_Win_Hole

--------------------------------------------------------------------------------------------------------------------------------

Chateau_Cellar_Mid_&_Windows,



Contents

1 x Chateau_Cellar_Mid_&_Grand_Win_Fake

1 x Chateau_Cellar_Mid_&_Grand_Win_Hole

1 x Chateau_Cellar_Mid_&_Small_Win_Fake

1 x Chateau_Cellar_Mid_&_Small_Win_Hole

1 x Chateau_Cellar_Mid_&_Square_Win_Fake

1 x Chateau_Cellar_Mid_&_Square_Win_Hole

1 x Chateau_Cellar_Mid_&_Tiny_Win_Fake

1 x Chateau_Cellar_Mid_&_Tiny_Win_Hole

--------------------------------------------------------------------------------------------------------------------------

Chateau_Grand_Hallway_Mid_&_Windows,



Contents

1 x C_G_Hallway_Mid_&_Grand_Win_Fake

1 x C_G_Hallway_Mid_&_Grand_Win_Hole

1 x C_G_Hallway_Mid_&_Small_Win_Hole

1 x C_G_Hallway_Mid_&_Small_Win_Fake

1 x C_G_Hallway_Mid_&_Square_Win_Fake

1 x C_G_Hallway_Mid_&_Square_Win_Hole

1 x C_G_Hallway_Mid_&_Tiny_Win_Fake

1 x C_G_Hallway_Mid_&_Tiny_Win_Hole

---------------------------------------------------------------------------------------------------------------------------------
Chateau_Studdy_Room_Mid_&_Windows,



1 x C_S_Room_Mid_&_Grand_Win_Fake

1 x C_S_Room_Mid_&_Grand_Win_Hole

1 x C_S_Room_Mid_&_Small_Win_Fake

1 x C_S_Room_Mid_&_Small_Win_Hole

1 x C_S_Room_Mid_&_SQ_Win_Fake

1 x C_S_Room_Mid_&_SQ_Win_Hole

1 x C_S_Room_Mid_&_Tiny_Win_Fake

1 x C_S_Room_Mid_&_Tiny_Win_Hole

-----------------------------------------------------------------------------------------------------------------------------------------
Important not DO NOT try to put all the segments into one folder as the textures will screw up
keep the contents in the folders I have already created.

I will be moving on to ww2 Door & Wall segments next...

If you download at least say thank you for my efforts

Regards SC

Files Removed until i fix the windows

Work hard Super Clark, take a little rest. .
Thank you for these beautiful things.


Intel Pentium CPU G3220 3.000 GHz , 8 GB Ram , NVIDIA GeForce GTX 745 2GB 1920 x 1080 , Windows 10 64-bit.
GameGuru , S2Engine HD , Shoot EM Up , CopperCube 6 , Clicteam Fusion 2.5 , Platfinity .

some updated pbr platforms.

Very nice work devlin m8, I have converted all the FPSC Classic Prefab Buildings
you fancy a pbr test on 1 to see what they come out like?

@ Super Clark
yea will have a go just re uploaded the file uploaded the wrong one.
hope you dont mind me posting here, dont want to jump on your work.

@devlin No problem m8 add what u want, I have attached file to post above... Thanks

textures list / Dot x file root
textures_ww2\\

c_c_01_d2.dds

f_c_01_d2.dds

f_c_02_D2.dds

f_c_03_D2.dds

g_a_01_d2.dds

g_b_01_d2.dds

stair_a_d2.dds

win_b_d2.dds

w_c_up_03_D2.dds

w_c_dn_01_d2.dds

w_c_dn_02_D2.dds

w_c_dn_03_D2.dds

w_d_mid_01_d2.dds

w_c_mid_01_d2.dds

w_c_up_01_d2.dds

w_c_up_02_D2.dds

w_d_dn_01_d2.dds

w_d_up_01_d2.dds

door_b_D2.dds